top of page
ACAP LOGO

AUSTRALIAN CENTRE for

ADVANCED PHOTOVOLTAICS

Organic solar cells: UQ challenges assumptions with a simpler approach

5 minutes ago
3 min read

UQ's single-material approach opens new possibilities for organic solar cells.

Organic solar cells offer the potential for lightweight, flexible solar technology that could be manufactured using low-cost printing and coating processes. But conventional designs rely on blending two different semiconductor materials in the active layer, creating complex structures that can be difficult to control and potentially challenging to scale.

Research led by Associate Professor Paul Shaw, Emeritus Professor Paul Burn and Dr Shaun McAnally at the University of Queensland (UQ), with support from the Australian Centre for Advanced Photovoltaics (ACAP), is exploring a simpler alternative: making organic solar cells using a single semiconductor material.

The research has progressed from investigating how organic semiconductor materials generate electrical charges to developing and improving working solar cells. An initial study explored how the electrical properties of organic semiconductor films enable light-generated charges to separate spontaneously (spontaneous charge generation in high dielectric constant organic semiconductor films) [1]. Subsequent work improved device performance through changes to the cell architecture with the material Y6 [2]. In 2026, the team demonstrated how control of the Y6 film morphology enabled a power conversion efficiency of 5.4% in a small-area device measuring 0.08 cm². A larger 1.3 cm² device achieved 3.1% efficiency, an encouraging step towards demonstrating the potential of the approach beyond very small laboratory samples [3].


The UQ research has progressed from investigating how organic semiconductor materials generate electrical charges to developing and improving working solar cells.
The UQ research has progressed from investigating how organic semiconductor materials generate electrical charges to developing and improving working solar cells.

The results demonstrate that the simpler architecture can work much better than many researchers had anticipated.
The results demonstrate that the simpler architecture can work much better than many researchers had anticipated.


While efficiencies remain below those of conventional organic solar cells, Associate Professor Shaw says the results significantly narrow the performance gap and demonstrate that the simpler architecture can work much better than many researchers had anticipated. Shaw credits Dr Shaun McAnally, whose PhD research drove the work, for taking a different approach and focusing on the role of interfaces.


Dr Shaun McAnally, whose PhD research at UQ drove the work.
Dr Shaun McAnally, whose PhD research at UQ drove the work.

The team is now exploring whether the approach can be applied to other materials and whether efficiencies can be improved further. In February 2026, McAnally, Shaw and Burn published a perspective paper in Advanced Materials [4], examining the progress of single-chromophore homojunction solar cells and their potential to simplify device architectures. The paper also identifies opportunities to improve performance through materials design and further optimisation. In 2026, Shaw shared the findings through three keynote presentations at specialist research conferences.

"Single‑chromophore homojunction organic solar cells are rapidly emerging as a hot and promising pathway toward simplifying organic photovoltaic device architectures, offering fresh opportunities to rethink long‑standing design strategies," said Shaw.

"We hope this perspective helps frame recent progress, highlights key challenges, and inspires new ideas for molecular design and device engineering in next‑generation solar technologies." The work has drawn on facilities at UQ's Centre for Organic Photonics and Electronics (COPE), alongside ACAP support.

What do organic solar cells offer?

Organic photovoltaics (OPVs) are solar cells made from carbon-based semiconductor materials rather than silicon. They can be extremely thin, lightweight and flexible, with the potential to be manufactured using low-cost printing and coating processes. 

ACAP is investigating ways to make them more efficient, stable and environmentally sustainable, with a long-term goal of scalable, ultra-low-cost solar technology. OPVs have potential in tandem applications, and in enabling solar power generation in applications where conventional rigid silicon panels are impractical.

  References

1. Mallo, N. et al. (2024). Free-charge carrier generation in homojunction non-polymeric organic semiconductor films – the role of the optical frequency dielectric constant. Advanced Optical Materials. https://doi.org/10.1002/adom.202401825

2. McAnally, S. et al. (2025). High-efficiency Y6 homojunction organic solar cells enabled by a secondary hole transport layer. Small. https://doi.org/10.1002/smll.202409485

3. McAnally, S. et al. (2026). Y6 homojunction organic solar cells with over 5% power conversion efficiency by controlling the active layer morphology. Advanced Energy Materials. https://doi.org/10.1002/aenm.202504807

4. McAnally, S., Burn, P.L. and Shaw, P.E. (2026). Single-Chromophore Homojunction Organic Solar Cells: A Path to Simplicity and Efficiency. Advanced Materials, first published 1 February 2026. https://doi.org/10.1002/adma.202519358


 

© 2026 Australian Centre for Advanced Photovoltaics

bottom of page